Offshoreonly.com - Drive Gear Ratio

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Drive Gear Ratio (https://www.offshoreonly.com/forums/general-q/270795-drive-gear-ratio.html)

Recycle Perf

02-16-2012 11:05 AM

Drive Gear Ratio

I have a Bravo 3 upper with a 2.00 ratio, I want to install a lower unit from a bravo one X with a 1.5 ratio. What will be the gear ratio with the B3 upper and the B1 lower?

GTOFFSHORE

02-16-2012 11:41 AM

Quote:

Originally Posted by Recycle Perf (Post 3619201)

I have a Bravo 3 upper with a 2.00 ratio, I want to install a lower unit from a bravo one X with a 1.5 ratio. What will be the gear ratio with the B3 upper and the B1 lower?

Yes that combo will work. Count teeth in top needs to be 32. Pull top cap off.

Recycle Perf

02-16-2012 01:04 PM

I was told with the 2.00 B3 upper, and the stock Bravo lower from a 1.5 drive, the drive ratio would be 1.5 on my new combo. Is that correct?

Itsallgood995

02-16-2012 01:12 PM

correct

if it was a 2.20 upper w/ the b1 lower it would be 1.65

Recycle Perf

02-16-2012 01:52 PM

Thanks boys

t500hps

02-16-2012 02:39 PM

Quote:

Originally Posted by Itsallgood995 (Post 3619294)

correct

if it was a 2.20 upper w/ the b1 lower it would be 1.65

ditto.....

All times are GMT -5. The time now is 04:30 PM.