I Need Head!!!!
06-25-2002, 10:22 AM
#1
Registered
Thread Starter
Join Date: Jul 2001
Location: Clearwater Florida
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
I Need Head!!!!
I just got my motor apart and found it dropped #7 exhaust valve. I'm looking for a square port, open chamber. My casting is a 188, but a 990 will work. Anybody have any Chevy square port castings? I'm not sur what casting a old 420 head would be but think that will also work.
06-25-2002, 01:07 PM
#2
Banned
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Likes: 0
Received 0 Likes
on
0 Posts
Try Clearwater Cylinder Head Inc
(727) 572-1958 . I bought some heads from them. They know which heads are which. Good guys to deal with. Just be sure they don't sell you one with a helicoil in it.
(727) 572-1958 . I bought some heads from them. They know which heads are which. Good guys to deal with. Just be sure they don't sell you one with a helicoil in it.
06-25-2002, 09:20 PM
#4
Charter Member #232
Charter Member
Do you need one head or two? I have a slightly modified one that you can have. Make me a offer. I have the valves and springs and everything for it I am fairly sure.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
06-25-2002, 10:33 PM
#5
Two Merc 420 heads
I have two off of a 1989 motor, with valvetrain and valve covers.
John 716 688 7604 or email [email protected]
John 716 688 7604 or email [email protected]
06-26-2002, 07:46 AM
#6
Registered
Thread Starter
Join Date: Jul 2001
Location: Clearwater Florida
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the replies. Cuda, Clearwater Cylinder Head didn't have one but sad they thought they could repair mine. I'll know Friday. If they can't I'll be giving you other guys a call. Again Thanks
Thread
Thread Starter
Forum
Replies
Last Post
SHAKEN Not Stirred
Skater
13
04-23-2006 01:56 PM
Chris288
General Boating Discussion
10
10-01-2004 09:27 PM
