Offshoreonly.com - HP 500 valve springs

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - HP 500 valve springs (https://www.offshoreonly.com/forums/general-q/27397-hp-500-valve-springs.html)

gofastpilot

06-25-2002 07:21 PM

HP 500 valve springs

I need to replace the valve springs on My 1994 500's.What would be a good reasonably priced spring ,retainer and locks set ?.................Gofast

Cord	06-25-2002 10:04 PM

I know that Merc is buying the springs from a aftermarket supplier. Proably crane. Or was it comp? Either way, I believe that you want to use the newer HP500efi spring. This spring helps resolve some of the earlier breakage problems.

jbrauer

06-26-2002 08:18 AM

Try the info Scott gave me in this thread!

HP 500 valve springs

Good Luck!!:)

Scott

06-26-2002 07:41 PM

I ended up finding the seat pressure was still too high with the new crane springs I have switched over to Comp Cams. If you need a Part # let me know and I will look it up. This info and recomendation came from my head builder. Scott

gofastpilot

06-27-2002 01:25 PM

Scott , I was e-mailing comp-cams about springs and they mentioned part # 924-16 for a spring to use. Does that look like what your head builder would use?...............gofast

All times are GMT -5. The time now is 01:57 PM.