Go Back  Offshoreonly.com > Technical > General Q & A
Fuel gauge issue. (WTF) GOT GAS? >

Fuel gauge issue. (WTF) GOT GAS?

Notices

Fuel gauge issue. (WTF) GOT GAS?

Old 05-23-2012, 09:28 AM
  #1  
Registered
Thread Starter
iTrader: (1)
 
Join Date: Aug 2009
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Default Fuel gauge issue. (WTF) GOT GAS?

Replaced all my old gauges with new Livorsi gauges. Put the new fuel gauge in and it said full tank ran to 1/2 tank, then Guess what? Empty! ran out on the lake.. Yes I know should have checked the old gauge first..To excited with new gauges to pay attention... Other gauge worked fine.. Any thoughts? could the gauges be different in ohm readings?
silent lucidity is offline  
Old 05-23-2012, 10:02 AM
  #2  
Registered
 
Join Date: Jul 2009
Location: Bay City, MI
Posts: 1,402
Received 3 Likes on 3 Posts
Default

Possibly different ohm range, bad sender, wire issue.
hotjava66 is offline  
Old 05-23-2012, 11:41 AM
  #3  
Gold Member
Gold Member
 
Dave M's Avatar
 
Join Date: Oct 2000
Location: Hollywood, MD, USA
Posts: 5,652
Received 122 Likes on 77 Posts
Default

Pretty sure Livorsi does selll their own senders that are compatible with their gauges.

Do people really rely on their gas guages?

I look at boat fuel gauges as a wild azz guess + or - 20%.
Dave M is offline  
Old 05-23-2012, 12:05 PM
  #4  
Registered
 
Join Date: Aug 2011
Location: RI
Posts: 289
Likes: 0
Received 0 Likes on 0 Posts
Default

Curious about this as well. What were your previous gauges? I have a 98 Outlaw that I just redid with all new Livorsi and my fuel level seems off from where it was prior to install. My old gauges were Faria.
drivrswntd is offline  
Old 05-23-2012, 12:07 PM
  #5  
Registered
 
Join Date: Oct 2010
Location: Cheboygan, MI
Posts: 1,621
Received 398 Likes on 229 Posts
Default

My fuel gauge is only close when the boat is on it's trailer, don't ask me how I found that out. Discovered the same day that 150' of anchor line doesn't mean squat in the middle of Lake Huron. LOL!!
ThisIsLivin is offline  
Old 05-23-2012, 10:22 PM
  #6  
Charter Member # 55
Charter Member
 
Griff's Avatar
 
Join Date: Oct 2000
Location: Omaha/LOTO
Posts: 19,545
Received 1,811 Likes on 901 Posts
Default

The sender probably just needs to be adjusted.
Griff is offline  
Old 05-24-2012, 03:18 AM
  #7  
Registered
 
Join Date: Jun 2004
Location: Md
Posts: 330
Likes: 0
Received 1 Like on 1 Post
Default

http://www.offshoreonly.com/forums/g...uel-gauge.html
NightHawk is offline  
Old 05-24-2012, 11:27 AM
  #8  
Registered
iTrader: (4)
 
Join Date: Jul 2007
Location: Oneida Lake NY
Posts: 3,641
Received 29 Likes on 6 Posts
Default

My Livorsi senders have two small screws for adjustment, both of mine read full this year with just quater tanks after adding the first gas of the season. The proper adjustment procedure is to set empty level when empty and full level when full. I did the math to 1/4 tank with first gas and adjusted them to there...pretty close from what i can tell.

The screws are very sensative if you have them, just a hair turn will move the gauge a 1/4 tank
4bus is offline  
Old 05-24-2012, 08:19 PM
  #9  
Registered
Thread Starter
iTrader: (1)
 
Join Date: Aug 2009
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Talking

Originally Posted by silent lucidity
Replaced all my old gauges with new Livorsi gauges. Put the new fuel gauge in and it said full tank ran to 1/2 tank, then Guess what? Empty! ran out on the lake.. Yes I know should have checked the old gauge first..To excited with new gauges to pay attention... Other gauge worked fine.. Any thoughts? could the gauges be different in ohm readings?
Well. I talked to Livorsi and they suggested that I fill the tank (ouch) then pull the sending unit let the float drop down and hook power back up and let set for at least 5 mins to zero it out. Should read empty. Then put back in full tank and it should set the upper limit with it being full... Not sure how but hey I'll give it a whirl Ya-all.
could this be like snipe hutting?
silent lucidity is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.