Offshoreonly.com - what causes a new ign module to go out?

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - what causes a new ign module to go out? (https://www.offshoreonly.com/forums/general-q/277399-what-causes-new-ign-module-go-out.html)

Ted G

05-29-2012 03:47 PM

Quote:

Originally Posted by Airpacker (Post 3697418)

Good idea Ted but, I would suggest the better way to test the ground is to use a volt meter while the engine is running and check between the distributor and block and the block and ignition module.
Any more than 100 milivolts, under 50 would be preferable and I would be cleaning up grounds. Far more accurate than using an ohm meter.

You're right, I was sleepy last night. :lolhit:

Alex	05-30-2012 09:21 AM

Something that is most often forgotten is that the tach wiring could cause problems ;-)

All times are GMT -5. The time now is 03:53 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page