Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   temp sending unit (https://www.offshoreonly.com/forums/general-q/280617-temp-sending-unit.html)

tnc110 07-13-2012 01:11 PM

temp sending unit
 
454 carb has 2 sending units in the tstat housing. Which is for the alarm and which is for the gauge, or does it not matter?

Drock78 07-13-2012 01:25 PM

i think the alarm has the blue stripe and sending unit is plain brown

whoya 07-13-2012 04:29 PM

Just ground the wire to find out.

akaboatman 07-13-2012 04:35 PM


Originally Posted by whoya (Post 3729541)
just ground the wire to find out.

+1

tnc110 07-13-2012 05:50 PM

The sending units are different...does it matter which is hooked to which?

MILD THUNDER 07-13-2012 06:32 PM


Originally Posted by tnc110 (Post 3729577)
The sending units are different...does it matter which is hooked to which?

yes it matters. One is basically a on/off switch for the warning buzzer. The other is a resistance type for a guage.

Wes Burmark 07-13-2012 08:56 PM

My gauge sensor looks like a 3/16" threaded bolt. The alarm sensor is oval shaped.

http://beautifulmauicondo.com/boatpictures/removed2.jpg

whoya 07-13-2012 09:59 PM

Oops. I was thinking you were trying to figure out which wire was which. As Wes said.

tnc110 07-14-2012 09:32 PM


Originally Posted by MILD THUNDER (Post 3729606)
yes it matters. One is basically a on/off switch for the warning buzzer. The other is a resistance type for a guage.

ok, so which is which? They both have the same connector. I have to pull my thermostat tomorrow, as I think it is stuck open, so I will be able to look at the inside of the sending units. But I don't know what to look for?


All times are GMT -5. The time now is 12:30 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.