Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Ignition timing (https://www.offshoreonly.com/forums/general-q/280807-ignition-timing.html)

aafed 07-19-2012 06:10 PM
well I have v8 24 module does anyone have a v module?

articfriends 07-19-2012 08:21 PM
Originally Posted by Griff (Post 3731243)
If you have a TB IV with a stock v8-24 module, full timing advance does not come in until around 3700rpms. If you are 33* at 3000rpm, you could easily be at 37-38* at 3700rpms---which is too much.
I seen the timng tables recently from a innovation hp 500 efi and I was surprised to see it was set for 38 degrees at 5000 rpm and 100 map (0 vacuum).


All times are GMT -5. The time now is 02:53 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.