Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Jersey Speed Skiff (https://www.offshoreonly.com/forums/general-q/281772-jersey-speed-skiff.html)

jackieboy 07-30-2012 06:50 PM
Jersey Speed Skiff
 
I have a Jersey Speed Skiff that needs an oil pan. If anyone on here knows where i can get one i would appreciate any information that would help me out. The boat is a 1976 Bender skiff with a three part setup (transmission-engine mount- and then oil pan). You have to remove the transmission and then the engine mount to get to the pan, the motor is a small block Chevy. Thanks in advance for any information. [email protected] A stock pan will not work because all three parts are bolted together.

Richiehd 10-03-2012 12:08 PM
Originally Posted by jackieboy (Post 3742185)
I have a Jersey Speed Skiff that needs an oil pan. If anyone on here knows where i can get one i would appreciate any information that would help me out. The boat is a 1976 Bender skiff with a three part setup (transmission-engine mount- and then oil pan). You have to remove the transmission and then the engine mount to get to the pan, the motor is a small block Chevy. Thanks in advance for any information. [email protected] A stock pan will not work because all three parts are bolted together.
You need a small block early Chris Craft pan, for 283-327. I take your cast ppan is rotted out. Check with Steffs Fabrication in Lalewood NJ. He might be able to help you.

dereknkathy 10-03-2012 04:22 PM
go down to gormley's in westville. that quonset hut has a bunch of early small block inboard oddball stuff. talk to bob smizer. derek.


All times are GMT -5. The time now is 05:06 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.