![]() |
WTH is this sound coming from 502 mag mpi
My buddy's Formula 312,, stbd eng. 502mag MPI.. every now and then makes a ZZiiiiiiinnnngggggg sound. then gone. No loss of oil pres. The belts are good. Even cut oil filter to check for any metal. Eng. runs fine..
WTH can this be?? It's happening more often now he says.. but he can't catch it.. Come OSO'rs.. I told him someone here will know.. |
Maybe a belt pulley or idler?
|
Good thing it isn't a ZZZAAAAAAAAAAANNNNNNGGGG sound, that would be bad........ Catch it on a vid maybe? I have no clue, maybe a bearing in the tensioner going?
|
Originally Posted by mr3dman
(Post 3759676)
Good thing it isn't a ZZZAAAAAAAAAAANNNNNNGGGG sound, that would be bad........ Catch it on a vid maybe? I have no clue, maybe a bearing in the tensioner going?
F-it maybe he just needs new 525's. |
Starter slinging out?
Had an old lawn mower that did this and it was a zing and not a zang sound. |
Originally Posted by looseconnection
(Post 3760031)
Starter slinging out?
Had an old lawn mower that did this and it was a zing and not a zang sound. |
run boat without cell phone :whistle:
|
+1... More than likely the bearing.
Originally Posted by Precision
(Post 3759662)
Maybe a belt pulley or idler?
|
Check the starter!
|
Possibly a broken return spring in the starter solenoid, allows the gear to contact the flywheel intermittently.
|
| All times are GMT -5. The time now is 05:11 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.