Offshoreonly.com - gil riser material??

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - gil riser material?? (https://www.offshoreonly.com/forums/general-q/283871-gil-riser-material.html)

wayne272

08-30-2012 05:59 PM

gil riser material??

2 Attachment(s)

Haven't had these off, but was wondering if they are powdercoated stainless or what. Looking to remove the silent choice and extend the risers by welding on 6" extensions to run a different cam.

Griff

08-31-2012 01:19 AM

You would be better off to look for a set of used full length risers than to weld on those.
Then sell yours a complete silent choice set up.

FIXX	08-31-2012 03:33 PM

see if a magnet sticks to them,,if they do their steel if they dont then their stainless.

MOP	08-31-2012 04:53 PM

The only way they came was S/S, they cane be welded but the suggestion above is a good one.

Phil

wayne272

08-31-2012 05:16 PM

Quote:

Originally Posted by mrfixxall (Post 3766800)

see if a magnet sticks to them,,if they do their steel if they dont then their stainless.

Already tried that and didn't stick.

All times are GMT -5. The time now is 05:03 AM.