Offshoreonly.com - Help, crank to block distance, BBC

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Help, crank to block distance, BBC (https://www.offshoreonly.com/forums/general-q/284015-help-crank-block-distance-bbc.html)

RMPRam

09-02-2012 09:29 PM

Help, crank to block distance, BBC

I need the distance from the rear block face, where the bellhousing bolts to, to the face of the crankshaft, that the flywheel bolts to. Anyone have a BBC or a SBC with a crank in it, that can measure the distance for me?? Thanks.

GPM	09-03-2012 05:38 PM

Looks like .625

RMPRam

09-04-2012 06:29 AM

ttt

RMPRam

09-04-2012 09:38 AM

I measured 2 blocks and came up with .700" on one and .725" on the other. I'm looking for a more accurate measurement or th confirm what I found. Thanks.

Gary

f_inscreenname

09-04-2012 12:53 PM

What are you trying to confirm?

cubicinches

09-04-2012 05:21 PM

Quote:

Originally Posted by RMPRam (Post 3768699)

I measured 2 blocks and came up with .700" on one and .725" on the other. I'm looking for a more accurate measurement or th confirm what I found. Thanks.

Gary

I just measured a Mk IV that I have at my shop... I came up with .715". You're bound to get some slight variation depending on total end-play of the crankshaft, and where it's resting in the block at the time of measurement (fore/aft-wise).

All times are GMT -5. The time now is 09:51 PM.