I need Seal Kit for Marine Machine Steering Ram
 

I sent Bing a email to the smokeshop with no response,I tried finding a phone # ,old one disconnected.Anybody got any contact info or somewhere I can order seal/orings.I believe its just the outer seal/prob a double lip.

The ram is staring to drip a little fluid at the seal,very minute amount,Maybe one drop per 3 days,level has not even changed,its not worse when running either,weird, I did see a little something on the male shaft that I could hang my fingernail on,I took some 2000g and smoothed it out but it wasn't enough to nick the seal.

Thanks for any help

Rob:drink:

you can still get them from bing. you will have to find someone else to install. I had a local hydraulics company do some, and they said they could get seals.

I tried to get them from him

I need to rebuild mine also. I plan on taking them to my local hydraulic shop when I get them apart. They are just a standard cylinder that are very pretty. They say they have done a dozen over the years and are off the shelf seals.