carb base plate for Gaffrig flame arrestor help
09-15-2012, 09:09 AM
#1
Registered
Thread Starter
Join Date: Jul 2010
Location: Bethalto, IL
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
carb base plate for Gaffrig flame arrestor help
I bought a used 10" diameter Gaffrig flame arrestor but need a base plate for it to go around the holley carb.
Anyone know where to get one or what I need? Looks like it needs to be around 8" in diameter to cover the bottom of the flame arrestor.
Figure I'd ask on here before waiting until next week to call Gaffrig.
Anyone know where to get one or what I need? Looks like it needs to be around 8" in diameter to cover the bottom of the flame arrestor.
Figure I'd ask on here before waiting until next week to call Gaffrig.
09-15-2012, 08:49 PM
#2
Registered
Join Date: Oct 2009
Location: burlington, iowa
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
my guess is you have edelbrock or holley 4150/60 carb with 5-1/8 top flange. 8 would be for holley dominator carb. looks ike nobody makes adapter. could get aluminum disc made, just check for interferences, or swap for right one
