Tach not working after new DUI dis
 

I changed my stock distributor on my bbc gen 4 to a DUI ignition with a internal rev limiter. Now I cannot get my techs to work. There is a green wire coming from the distributor I have plugged it in and still no tacs. Any ideas on how to make this work

Thanks steve

look where the power wire goes to lite the ignition,,rite next to it is the negative side of the coil..try pluging the tach wire their..

Tachs
 

I have tried plugging the green wire into it. I have also tried plugging the tach wire into it stil no tach.


Steve

Did you by the DUI distributor set up for a tach? They make both, not tach ready and tach ready. If you hit up their website you will see what I am talking about, i have been looking at these to replace the thunderbolts on my twins.