Okay. We'll be there Saturday evening to stay the night. Again my cell# is (571)215-9518

Eric

hi maxx
 

hey listen i have a similar problem with my boat went from a alha to a bravo added more power and same speed how fast are you going know ?? will help me out alot dont know which way to go ??

cord
 

cord you are wrong a alpha and a bravo are not the same the bravo is 1 1/2 longer and they make a ss drive for the alpha that was 2 in shorter thats the problem i am having got bad info did the conversion and know the boat slowed down big time

Tommy, mine didn't slow because I went to the BB. However, it didn't make the speed it should either. A friend of mine has the same boat I do, and he swapped over to a 502 EFI and a Bravo. He's experiencing the same problems; he has to use a 21p prop to get the rpms out of the motor. The factory versions will run a 24 to 26. That's a good indicator that too much much drive is stuffed in the water. I think you are correct on the overall length of the Bravo; I measured from shaft to shaft and they measured about the same. That's a mute point now, though. I will keep you updated on our progress, and I will probably post some pictures.

HI
 

PLEASE DO POST AND EMAIL ME PICS AND LET ME KNOW HOW YOU MAKE OUT WITH SPEED ALSO THANKS

MY EMAIL IS [email protected]

Okay, hopefully we can get started this week end. :)

GOODLUCK