Identify this crank sensor?
 

Can anyone here identify this crank trigger/sensor and lead me to where I could buy one? It's on a buddies Bullet 800EFI engine.

Thanks!

Kurt

800 efi's in a bullet!?!? Sounds like fun!

What plug is on the other end? EFI Technologies ECU on the motor?

I don't know what ecu it's got. I'll try to get a pic of the connector later today.

Thanks,

Kurt

It's not from EFI Technologies. Here's a few more pics.

If anyone could shed some light here, I'd really appreciate it!

Thanks, Kurt

Could really use some help here guys!!!!:thankyouthankyou:

HELP!!!!!!!!!!!!!!!:lolhit: Anyone have any input? We used to have such a wealth of tech guru's on this site, were did they all go?

Could really use some help here! :thankyouthankyou:

Looks patched together. Had the connector and a sensor and went at it. Find the engine builder and ask or go to maker of efi and ask specs on sensor and patch a new one together. Sorry no real help but thats how i would go about it.

Unfortunately the engine builder is out of business. The ECU unit has no markings and had been painted.

I'll get a pic of the ecu, hopefully someone can identify it.

Hall Effect Switch
 

It's a magnetic hall effect switch either a 3 or 4 wire. Your picture looks like a 3 wire. Check Jegs or Summit... Crane makes them.
Holley makes them many manufactures.

If you have one from a 525 it will work.\\

Call FAST they can fix you right up.

Big thanks! I'll call FAST in the morning.

Greatly appreciated!

Kurt

Contact Joe Oplawski at Hyperaktivps.com. If he doesn't know what it is, he can put you one together.

might work..http://www.ebay.com/itm/RED-LION-Mod...item3a742ace5b

looks like one from en electromotive sat up

Thanks, I think you are correct. The ecu also looks like one of theirs.

Thanks again for the help guys!

Kurt