Quick engine cradle clarification?
10-18-2012, 07:35 AM
#1
Registered
Thread Starter
Join Date: Jul 2010
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
Quick engine cradle clarification?
Do the 496's fit on the same cradle as the 502? Also, as I'm shopping, I see some say sbc/BBC and 1000 lbs...are the sb the same as the bb? Is 1000 lbs enough for a bb to just store?
I am inquiring about the cradles that are real low/close to the ground with 4 wheels...not an engine stand that is used to work on that is about 3 feet off the ground.
Thanks!
I am inquiring about the cradles that are real low/close to the ground with 4 wheels...not an engine stand that is used to work on that is about 3 feet off the ground.
Thanks!
10-18-2012, 07:55 AM
#2
Platinum Member
Platinum Member
iTrader: (6)
the SB & BB from the rear of the block to the motor mount is the same distance, thats where these cradles mount and yes 1000lbs is ok
