Offshoreonly.com - What BB Cast aluminum oil pan

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - What BB Cast aluminum oil pan (https://www.offshoreonly.com/forums/general-q/286994-what-bb-cast-aluminum-oil-pan.html)

What BB Cast aluminum oil pan

I would appreciate any help on identifying the oil pan in the pictures below and where to find one. I know the pictures are not great but it is hard to get a good picture of. It is a cast aluminum pan and I would say about 10 qts. It does NOT have mercury cast in the side like some that I have seen. I know there not stock but they are on 500 HPs.

Thank you for any help

http://i44.photobucket.com/albums/f4...s/IMG_4808.jpg

http://i44.photobucket.com/albums/f4...s/IMG_4806.jpg

http://i44.photobucket.com/albums/f4...s/IMG_4805.jpg

http://i44.photobucket.com/albums/f4...s/IMG_4803.jpg

http://i44.photobucket.com/albums/f4...s/IMG_4801.jpg

.

I don’t know if this helps but the engines were done at Loe’s Marine. I would like to find one pan.

Thanks for any help

Kinda looks like one of the old Gil pans. Hardin is making them now.That's what I think you have. Its hard to tell from the pics since you can't see much.

http://www.cpperformance.com/p-12497...bbc-gen-4.aspx

Eddie

Thank you for the help. It looks like that could be the pan. I will try to find out if it has that pad on the front with the bolt holes. If it does it must be it, so it looks like I will be buying one of them. I am sure it would be hard to find used.