Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   CMI Air Cylinders (https://www.offshoreonly.com/forums/general-q/291089-cmi-air-cylinders.html)

jamontes 02-04-2013 09:31 AM

CMI Air Cylinders
 
Does anyone know a good replacement air actuator for the CMI captian's call?

Budman II 02-04-2013 02:05 PM


Originally Posted by jamontes (Post 3861240)
Does anyone know a good replacement air actuator for the CMI captian's call?

I would try searching eBay - there are a lot of air actuators for sale on there. I think there are a few web sites that sell them as well. You will want to measure the stroke and piston diameter of the ones you have - you should be able to find something pretty close.

FIXX 02-04-2013 05:47 PM

fixx
 

Originally Posted by jamontes (Post 3861240)
Does anyone know a good replacement air actuator for the CMI captian's call?

good luck,been searching for over a year,,need 2 of them..cmi is nuts on their prices at 150 ish each when i can but a similar one for 10 bucks and they are also stainless steel..im tempted to just buy 4 of them and be done with it,,

jamontes 02-04-2013 09:56 PM


Originally Posted by mrfixxall (Post 3861472)
good luck,been searching for over a year,,need 2 of them..cmi is nuts on their prices at 150 ish each when i can but a similar one for 10 bucks and they are also stainless steel..im tempted to just buy 4 of them and be done with it,,

Found some on eBay $16 a piece. Look the same and function the same. I will post the results. $150 is a joke.

FIXX 02-04-2013 10:07 PM

plastic ends?
 

Originally Posted by jamontes (Post 3861664)
Found some on eBay $16 a piece. Look the same and function the same. I will post the results. $150 is a joke.

plz post the link1 thanx..


All times are GMT -5. The time now is 01:26 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.