Trim Tab thru hull fitting where to by
 

Have a set of K Planes and need to replace the thru hull fitting for the lines. One tab has Stainless there other had aluminum and they oxidized thru so now I have to find them. I assume they are available just not sure if its a merc thing or others would stock or have them, I.E. bam cp rex ect.
Thanks
Mike

If you are talking about the tube that threads into the back of the tab bracket, and is threaded in the center on both ends for the hydraulic lines, I bought them through land and sea. I think they were about 25 each, I needed 4. They came stainless....

Comm have a link or part number? Also those fuel pumps you asked about are rebuiltable

http://www.boatpartssource.com/pages...COMMON39629664

Hope that works.....too expensive though. My land and sea acct. Would not let me copy on ipud.....

How much for the pumps....

By the way....if we are talking about the same part, it is number 6 in the schematic

20 for both ill do 90 shipped with the 2 pumps and timing cover

Yup that's it let me k ow if you can get the land and sea page up ill but from them

How many do you need? I will buy and send to you. Land and sea is wholesale only (u need an account)

Go ahead with the pumps and cover...we figure out the difference.

Only need 2 ill shop your stuff today hopefully

Ok....got ur pm....will order tonight.....should be here by thurs/fri latest