Mercury Racing QCV4 - difference in length between 700 and 1350?
 

Single engine boat. The 700Sci / NXT package has been happily installed for some time.

I've got 4-3/4" remaining between outer nut of the tensioner and the bulkhead forward.

I've got 6" remaining between outer surface of supercharger pulley and the bulkhead forward.

I was told previously the 1100/1350 package would not fit.

Could some folks please chime in and tell me
1) If you think 1350 package would fit as is - I know I could
always chop and cut
2) If you have any specific measurements that indicate just how many inches longer overall the 1350 package is over the 700 Sci package.


Thanks in advance!

I would go straight to the horses mouth,

Contact Mercury Racing

For information on Mercury Racing Outboards, Sterndrives, Parts and Accessories, contact the Mercury Racing Sales Team at 920-921-5330.

Waiting for a call back from them already.

Anyone who has dealt with Mercury knows they aren't the best outlet for information on even their own products.

There are experts on here who actually have installed numerous of these things themselves whereas the folks at Mercury who answer the phone are well trained in their area, but having them read me a spec sheet that shows I've got enough room after subtracting two numbers isn't the same as hearing it from someone who has actually done or seen an installation and considered this kind of thing. See where I'm going with this?