Go Back  Offshoreonly.com > Technical > General Q & A
502 mpi running on 4 cylinders >

502 mpi running on 4 cylinders

Notices

502 mpi running on 4 cylinders

Thread Tools
 
Old 05-04-2013, 08:00 PM
  #1  
Registered
Thread Starter
 
Join Date: Dec 2010
Location: Lake Ariel PA
Posts: 310
Likes: 0
Received 0 Likes on 0 Posts
Default 502 mpi running on 4 cylinders

Ran the boat today made a couple laps at WOT, headed back and it hiccuped so I backed out of the throttle then started running like s*** after putting a new cap and rotor and a coil still running the same

After some trouble shooting 2 cylinders are down on th port and starboard side

Port side cylinders 1 and 7 are down
Starboard side cylinders 4 and 6 are down

Any ideas? I'm thinking a distributor but not sure
tdpb2008 is offline  
Old 05-04-2013, 08:29 PM
  #2  
Registered
 
Join Date: Jan 2006
Location: taxachusetts
Posts: 3,092
Received 698 Likes on 352 Posts
Default

sound like an injector wire feed from ecu went bad.
sutphen 30 is online now  
Old 05-04-2013, 08:42 PM
  #3  
Registered
Thread Starter
 
Join Date: Dec 2010
Location: Lake Ariel PA
Posts: 310
Likes: 0
Received 0 Likes on 0 Posts
Default

So is that the injector harness that runs cylinders 1746?
tdpb2008 is offline  
Old 05-04-2013, 09:17 PM
  #4  
Registered
 
Join Date: Jan 2006
Location: taxachusetts
Posts: 3,092
Received 698 Likes on 352 Posts
Default

Originally Posted by tdpb2008
So is that the injector harness that runs cylinders 1746?
sounds like it.there are 2 driver circuits from the ecu.also check the 12v feed to them also.
sutphen 30 is online now  
Old 05-04-2013, 09:20 PM
  #5  
Registered
Thread Starter
 
Join Date: Dec 2010
Location: Lake Ariel PA
Posts: 310
Likes: 0
Received 0 Likes on 0 Posts
Default

Ok will do
tdpb2008 is offline  
Old 05-04-2013, 09:24 PM
  #6  
Registered
Thread Starter
 
Join Date: Dec 2010
Location: Lake Ariel PA
Posts: 310
Likes: 0
Received 0 Likes on 0 Posts
Default

How would I test these? And where
tdpb2008 is offline  
Old 05-04-2013, 09:40 PM
  #7  
Registered
 
Join Date: Jan 2006
Location: taxachusetts
Posts: 3,092
Received 698 Likes on 352 Posts
Default

Originally Posted by tdpb2008
How would I test these? And where
at the injector w/ a noid light.
sutphen 30 is online now  
Old 05-04-2013, 10:30 PM
  #8  
Gold Member
Gold Member
iTrader: (4)
 
Randy Nielsen's Avatar
 
Join Date: Jan 2011
Location: Omaha Ne
Posts: 1,482
Likes: 0
Received 0 Likes on 0 Posts
Default

I am looking at my wiring harness for another problem but you might check your grounds. There are 3 grounds on the injection harness alone. Randy
Randy Nielsen is offline  
Old 05-05-2013, 07:23 AM
  #9  
Registered
Thread Starter
 
Join Date: Dec 2010
Location: Lake Ariel PA
Posts: 310
Likes: 0
Received 0 Likes on 0 Posts
Default

It's weird it was running great then it hiccuped and has run on 4 cylinders...they just all of a sudden go?
tdpb2008 is offline  
Old 05-05-2013, 07:59 AM
  #10  
Registered
Thread Starter
 
Join Date: Dec 2010
Location: Lake Ariel PA
Posts: 310
Likes: 0
Received 0 Likes on 0 Posts
Default

I just checked the spark and it does have spark on all cylinders
tdpb2008 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.