Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Bravo 1 upper/lower compatibility (https://www.offshoreonly.com/forums/general-q/296370-bravo-1-upper-lower-compatibility.html)

jamontes 05-14-2013 07:43 PM

Bravo 1 upper/lower compatibility
 
Are all years of bravo 1 uppers and lowers interchangeable?

blue thunder 05-14-2013 07:49 PM


Originally Posted by jamontes (Post 3925607)
Are all years of bravo 1 uppers and lowers interchangeable?

I've been interchanging them for years. You just need to plug the oil transfer hole in either the upper or lower if the other side doesn't have a mating hole.

jamontes 05-14-2013 07:52 PM

Thanks!

blue thunder 05-14-2013 07:59 PM


Originally Posted by jamontes (Post 3925620)
Thanks!

A tap for 5/16 course thread fits perfect in the hole with no drilling. Then locktite in a SS set screw. Before tapping I put some paper towel down in the hole to catch the chips then use a shopvac to suck out the chips and papertowel when done.


All times are GMT -5. The time now is 04:37 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.