Offshoreonly.com - Top mounting starter for a bravo one?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Top mounting starter for a bravo one? (https://www.offshoreonly.com/forums/general-q/297512-top-mounting-starter-bravo-one.html)

crf311

06-03-2013 05:59 PM

Top mounting starter for a bravo one?

Does anyone know if there is a bravo 1 bellhousing which will accept a top mounting starter? I broke the phucking outer bolt off in the block and then broke off the easyout trying to get the dam broken bolt out. I tried drilling smaller holes around the easyout with the hope of being able to know it loose. Had no luck with that. I've drilled and drill for 8hours today and i'm ready to give up. I wish it would have been one of the inner bolt. That fix would have been easy. Just looking for some options here guys. Thanks Robert.

Mbam	06-03-2013 06:33 PM

Not enough room between the back of the engine and the transom

crf311

06-03-2013 07:15 PM

Quote:

Originally Posted by Mbam (Post 3936297)

Not enough room between the back of the engine and the transom

That's what I though. Thanks

zz28zz

06-03-2013 08:45 PM

If you can smack the easy-out with a hefty punch and a big hammer it will shatter. Done it a couple of times.

crf311

06-03-2013 09:03 PM

Quote:

Originally Posted by zz28zz (Post 3936414)

If you can smack the easy-out with a hefty punch and a big hammer it will shatter. Done it a couple of times.

I'll give it a shot in the morning. I just don't want to crack the ear off.

All times are GMT -5. The time now is 12:38 PM.