How easy to go dual hydraulic steering from single?
 

my 94 sunsation aggressor currently has a single ram hydraulic steering setup that runs to the helm. I am interested in going with duals if it isnt too much of a swap. Is it as easy as buying a second ram and running hoses?

Basically. If you already have full to the helm single ram all you would need to do is get a second ram,mounting hardware, wing plate (if you don't have one that is set up for duals) 2 Tee fittings for the one side and some lines. Not very complicated at all.

Do you have a power steering pump on the engine? Or is the steering helm the actual pump?

I have a power steering pump and the lines all run to the steering wheel. It's not the Brazil valve setup

Here is a pic of the steering setup on it. Do any of you happen to know who wouldve made this or where i can find the matching ram?

http://www.sunsationboats.com/forums...1&d=1313765028

Looks like a hynautic ram that has been plated.

do you have any pics of the inside of the boat, like the reservoir?

hynautic k5
http://i225.photobucket.com/albums/d...i/IMG_1064.jpg

Is your steering pretty solid now? I think a single ram system is adequate on a boat that size. I had a 24 Superboat, with a single ram, full system and the steering was great.

http://www.go2marine.com/product/812...hrough-k9.html

Looks like the ram alone will run you $675