![]() |
Originally Posted by stlliberator
(Post 3954353)
Took me two seasons to finally figure out my PS issue..turned out to be the low pressure return line..had a small pin hole leak in it, and would cause the fluid to leak out and cause problems. I would just check, or replace the line, its simple to do, esp since you said you seen fluid in the bilge sometimes..
diagram and parts list there was a seal rebuild kit that is no longer available for the control valve. Is this a common issue for this old type steering assembly |
your control valve has been modded for the Hyd steering, ck with latham or whoever your system came from, they should be able to help...
|
| All times are GMT -5. The time now is 05:47 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.