Proven cam combos 540CI??
10-16-2013, 07:55 PM
#1
Gold Member
Gold MemberThread Starter
iTrader: (5)
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,634
Likes: 0
Received 204 Likes
on
132 Posts
Proven cam combos 540CI??
I wiped out a cam 2 weels ago when a lifter had issue, soooo.... now I am wondering if I do the upgrade now I was gonna do next winter, or just replace what I have...
What I have now is 547CI Aluminum heads 310 CC runner I am almost positive 9.2:1 with single plane intakes....
The cams now are supposed to be custom grind, I am working on finding out what they are fir sure, but so far came up with ...
114LCA
.578 lift
I think somewhere around 232/[email protected]
whats good for 650-700 HP??
What I have now is 547CI Aluminum heads 310 CC runner I am almost positive 9.2:1 with single plane intakes....
The cams now are supposed to be custom grind, I am working on finding out what they are fir sure, but so far came up with ...
114LCA
.578 lift
I think somewhere around 232/[email protected]
whats good for 650-700 HP??
Last edited by Full Force; 10-16-2013 at 08:03 PM.
10-17-2013, 08:48 AM
#5
Registered
iTrader: (4)
What exhaust? What heads and what do they flow? And it might might be a little bit of a stretch to get 700HP @ 9.2:1 without getting into a big cam.
JimV's 540 cam makes a little over 700HP but that is with his aluminum heads, 10:1 and a relatively mild cam with ~0.650 lift.
I'll see if I can find a cam card. This is just what I have seen on the dyno and it is a combination of everything to achieve what you want.
JimV's 540 cam makes a little over 700HP but that is with his aluminum heads, 10:1 and a relatively mild cam with ~0.650 lift.
I'll see if I can find a cam card. This is just what I have seen on the dyno and it is a combination of everything to achieve what you want.
Last edited by Rookie; 10-17-2013 at 08:51 AM.
10-17-2013, 12:14 PM
#9
Gold Member
Gold MemberThread Starter
iTrader: (5)
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,634
Likes: 0
Received 204 Likes
on
132 Posts
[ATTACH=CONFIG]510130[/ATTACH]i got a hold of erson and sent them picture of back of cam he said its custom going and this is the card he sent me of what's in it now
To me it's small for the CI I have stainless marine dry to the transom long risers.... 650 is about perfect future hp for this boat with TRS drives not gonna take much more
To me it's small for the CI I have stainless marine dry to the transom long risers.... 650 is about perfect future hp for this boat with TRS drives not gonna take much more
