Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Tall deck to short deck? (https://www.offshoreonly.com/forums/general-q/305401-tall-deck-short-deck.html)

Cobra100+ 11-15-2013 03:22 PM
Tall deck to short deck?
 
Has anyone machined a tall deck intake to fit a short deck? I have 2 BDS blower intakes for a tall deck and need to run them on a short deck so I was thinking of just machining the flanges down to fit, they are pretty thick right now. Anyone done this and have some reference diminsons or a bad experiance? Thanks

FIXX 11-15-2013 05:20 PM
Originally Posted by Cobra100+ (Post 4027639)
Has anyone machined a tall deck intake to fit a short deck? I have 2 BDS blower intakes for a tall deck and need to run them on a short deck so I was thinking of just machining the flanges down to fit, they are pretty thick right now. Anyone done this and have some reference diminsons or a bad experiance? Thanks
yes its been done,,make sure you take it to a good machine shop and make sure you have the motors they are going on their for the proper measurements..

mike tkach 11-16-2013 09:56 AM
i dont need them but if the price is right i might put them on the shelf,what will you take for them?


All times are GMT -5. The time now is 10:10 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.