Offshoreonly.com - Gen 5 parts into a gen6 block

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Gen 5 parts into a gen6 block (https://www.offshoreonly.com/forums/general-q/306145-gen-5-parts-into-gen6-block.html)

Fenderjack

12-07-2013 06:55 PM

Gen 5 parts into a gen6 block

Are the cranks and rods interchangeable between gen 5 and gen 6 blocks JOHN SR.

mike tkach

12-07-2013 08:40 PM

yes sir

FIXX	12-07-2013 09:13 PM

Quote:

Originally Posted by mike tkach (Post 4038369)

yes sir

i agree with jim darr!

mike tkach

12-07-2013 09:16 PM

Quote:

Originally Posted by fixx (Post 4038382)

i agree with jim darr!

u r jim darr

the deep

12-07-2013 10:40 PM

Quote:

Originally Posted by FIXX (Post 4038382)

i agree with jim darr!

:lolhit::lolhit::lolhit::evilb::stooges::angry-smiley-038:

mike tkach

12-07-2013 11:10 PM

im RAADARR

mike tkach

12-07-2013 11:13 PM

it,s amazing how fast things get off track around this place lately,must be winter.

tpabayflyer

12-12-2013 11:29 AM

I used a gen 5 454 forged crank in my gen 6 502 project. 1 piece rear seal all checked out good....... Flywheel and harmonic balancer we're used to balance and it needed a bit of tweaking but not too much...... Scat H-beam rods and SRP 2618 forged pistons were actually a bit lighter than the stock dimple rods and heavy stock pistons.......forged GM 4" crank looks like a pretty stout piece!! TBF

All times are GMT -5. The time now is 06:15 PM.