Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   How big is this oil pan (https://www.offshoreonly.com/forums/general-q/306465-how-big-oil-pan.html)

MER Performance 12-19-2013 11:30 AM
That oil pick-up has no resemblance to the one in the bull dog. I would call Stan @ Stef's, have him make one for you.

Black Baja 12-19-2013 01:26 PM
Originally Posted by MER Performance (Post 4044366)
That oil pick-up has no resemblance to the one in the bull dog. I would call Stan @ Stef's, have him make one for you.
X2 I would be a little afraid of that pickup cause its cut and welded. Oil beating around in a pan has a tendency to break stuff. A good windage tray and pickup is cheap insurance...

f_inscreenname 12-19-2013 07:39 PM
Guys, guys, guys ... A custom made pick up, really? I understand where you all are coming from but there is nothing wrong with this pick up. Hell I think its the best welding job on a pipe that I ever saw. Not to mention that I don't think it would move if a piston would hit it. Plus it's already welded on to the new oil pump. :whistle:

launchpad475 12-19-2013 07:45 PM
make sure it's welded good (preferably bolted) I'm rebuilding my 540 after 90 hours cuz the weld broke and it fell off. I'm not super thrilled about it.

Good luck.

MILD THUNDER 12-19-2013 08:28 PM
Originally Posted by launchpad475 (Post 4044622)
make sure it's welded good (preferably bolted) I'm rebuilding my 540 after 90 hours cuz the weld broke and it fell off. I'm not super thrilled about it.

Good luck.
I agree

f_inscreenname 12-19-2013 08:34 PM
Oh it's on there, ugly, but there to stay.:D


All times are GMT -5. The time now is 07:31 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.