![]() |
Originally Posted by US1 Fountain
(Post 4061584)
I've had the problem even with long idles thru marinas and back into the coves and engine hatch cracked. Made no difference. I also run the blower all the time. Have thought about bleeding the the fuel rail by the valve also, but had this ugly thought run thru my mind....if it's so hot in there to vaporize the fuel in the lines, no so sure I wanted to bleed it onto the top of said hot motors. :) Was going to do this the last time we had the boat out, but there were always other boats tied up next to me, so I decided against using that time to try it.
Trust me I've done it all, idled around like an idiot for 10 min, ran the blowers for 15-20 min. Hatch open, drink in hand, no drink. You name it....."It's not every time either. Only when I was ready to go home or getting dark or around a bunch of people.. It was always a classic, 10 or so people come up to us, comment on boat they all stand around to watch while you start it.. BOING! You idle away and PUT-PUT done.. All you can do is hang your head and swear your kicking some Merc. Engineers A-S... Hence why the fix is in...grrrrrrrr |
Maybe this is going off topic a little but could someone post up some pics of their fix, routing,parts, etcetera.
Im good with wrenches, but I dont know jack about efi systems.thx |
Originally Posted by buck35
(Post 4061891)
Maybe this is going off topic a little but could someone post up some pics of their fix, routing,parts, etcetera.
Im good with wrenches, but I dont know jack about efi systems.thx |
Thanks cole, its kind of amazing no one has done this yet given the number of people in the same % $2@# rowboat!
|
Mercury won't admit they have an issue, but they sure have a so called fix for it
http://www.ebay.com/itm/Mercruiser-N...#ht_1172wt_910 |
Originally Posted by 33outlawsst
(Post 4061914)
Mercury won't admit they have an issue, but they sure have a so called fix for it
http://www.ebay.com/itm/Mercruiser-N...#ht_1172wt_910 |
Originally Posted by AllDodge
(Post 4062027)
All the kit does is change the pump out and move it down low to keep it cooler. The best fix I've seen is the rerouting of the return fuel line back to the fuel tank.
|
Originally Posted by buck35
(Post 4061910)
Thanks cole, its kind of amazing no one has done this yet given the number of people in the same % $2@# rowboat!
|
I'm for 100% because I boat on a river between dams, there's not a lot of current but......no power no control where your going,, not to mention the whole hatch up we'll be ok thing
|
Originally Posted by buck35
(Post 4062275)
I'm for 100% because I boat on a river between dams, there's not a lot of current but......no power no control where your going,, not to mention the whole hatch up we'll be ok thing
You would think there would be some Danny Davito type lawyer or firm that would pick this up.. Imagine how many would pile on.. |
| All times are GMT -5. The time now is 03:52 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.