Offshoreonly.com - What to do?

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - What to do? (https://www.offshoreonly.com/forums/general-q/308271-what-do.html)

Through various transactions I ended up as the proud owner of one -1- Supercharged ZZ502. The engine has a polished 8-71 Kuhl Supercharger, Teflon coated rotors, fuel-injection-system,, etc. The engine is drop dead gorgeous. I have been trying to sell it and have it on Ebay through a friend for 11,500.
This was a developmental engine GM Performance Parts was considering offering to the Street Rod world a number of years ago. It has a lot of bling, and is built with top notch parts. Only has dyno time and these engines turned well over 800 hp on the dyno.
Now an identical Supercharger set up in California has surfaced on Ebay. There were only 7 of these built in total. His has the ECU which I am missing- a MEFI 3 bosch controller.
The guy wants $ 6950 –good luck… with getting that much
The question is do I continue to sell my 502. OR buy the other supercharger- mate it to a ZZ502 and have a pair to drop into my Chris Cat (or another boat) ? The Chris Cat has Mk 4 468’s with roller cams, Dart Iron eagle heads and are 475hp on Tylers dyno.
I would have to beef up my BW 72c and be careful with my speedmaster 2’s. Also have to modify my engine hatch/sun pad as these engines are a lot taller. But I should have a 100mph boat then.
So turning to my friends on OSO I am asking for some wisdom here.

buy the other supercharger kit and put in your chris cat beautiful engine

I say go for it and build a second engine but would be concerned about the SSM 2's handling the torque without grenading.
It's always fun to want to spend other people's money isn't it,

I have to marinize the ZZ502. Needs oil pan, remote oil filter, accesories like water pump, alternator.

Wannabe

Quote:

Originally Posted by flyinlow (Post 4070073)

I say go for it and build a second engine but would be concerned about the SSM 2's handling the torque without grenading.
It's always fun to want to spend other people's money isn't it,

Taking up a collection for a spare SSM2 !!!!!!!!!!!!!!

That motor gives me wood

Quote:

Originally Posted by wannabe (Post 4070076)

Taking up a collection for a spare SSM2 !!!!!!!!!!!!!!

There's a pair of SSM2's on ebay right now that's about to end.

http://cgi.ebay.com/ws/eBayISAPI.dll...:B:WNA:US:3160

Quote:

Originally Posted by flyinlow (Post 4070093)

There's a pair of SSM2's on ebay right now that's about to end.

http://cgi.ebay.com/ws/eBayISAPI.dll...:B:WNA:US:3160

Sent an email asking if they have pics of bullet lowers and what length shafts- I have long shafts now.

That would be beautiful in my Chevelle, what is it like to have such a dilemma!! I say put another one together and put them in the Cat.

Sell the 502 and ssm ii setups buy some ssm 3s. Then put some blowers on the 468s. 700 - 750hp a side with 3's will work great. Much stronger drive and transom assemblies for high speed safety