Offshoreonly.com
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Quadrajet limitations? (https://www.offshoreonly.com/forums/general-q/309226-quadrajet-limitations.html)

motor 03-04-2014 03:52 PM
Two bowls .one on each side

mike tkach 03-04-2014 10:16 PM
Originally Posted by MILD THUNDER (Post 4084223)
looks like a great carb at a fair price.you can,t go wrong with a quickfuel carb.

So2fast5u 03-05-2014 10:33 AM
Originally Posted by mike tkach (Post 4084680)
looks like a great carb at a fair price.you can,t go wrong with a quickfuel carb.
What? No ditch the carbs and go EFI Mike. I'm proud of u:lolhit:

Pismo10 03-05-2014 10:53 AM
Call SMI Induction at 714-843-9169. They are the newest QJet experts.

zz28zz 03-11-2014 08:21 PM
Originally Posted by mike tkach (Post 4084680)
looks like a great carb at a fair price.you can,t go wrong with a quickfuel carb.
I've been looking at those for a while. I was wondering abt trying to tune it on the water. Jet changes on the water would be tough but air bleed screws would be easy. Just don't know how much the afr can be changed by swapping air bleeds only.

MILD THUNDER 03-11-2014 08:37 PM
Changing jets on the water isnt that difficult....

zz28zz 03-11-2014 09:52 PM
No, it's not that difficult but air bleeds would be much easier and faster, plus you have to dispose of 4 float bowls of fuel somewhere every time you change jets.

Plowtownmissile 03-11-2014 10:29 PM
Originally Posted by Budman II (Post 4084351)
Pretty sure the Eddy's are based on the old Carter AFB's. Center fuel bowl like the Q-jets. Someone please correct me if I'm wrong about this. Have not fooled with one first hand.
Yes but they are squarebore. The Carter Thermoquad was the spread bore version. I have a shelf full of Competition series 1,000cfm Thermoquads along with more than a few complete Carter Strip Kits that I've accumulated over the years.


All times are GMT -5. The time now is 01:01 AM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.