Dire need of an accessory drive pulley for weiand 177
 

Looking for a 2 or 3v accessory drive pulley that works with the weiand 177 crank pulley for a 454.
I just found that mine was not the correct pulley and basically concerned that it's gonna come unglued at 5000 rpm.
So I called holley to order it and of course it's no longer available. So here I am with a dead boat without this one pulley!! Ugh
Any ideas? Thanks guys
Dave

try the blower shop, I think they have them

I did try them and they didn't have anything :-(

I have a bunch of that stuff but i am not sure what exactly you need, Can you post a photo?

Basically I need a 2v minimum crank pulley for big block chevy with short water pump that works with the weiand 177 crank pulley. One that aligns the crank pulley assembly correctly. I called summit to see if the one in there catalog would work "weiand 7036 pulley" and they were not sure if it would fit or not. I called holley to ask about it and the Reply I got was " that will not work and the one that is specific for that assembly has been discontinued. Ugh!!!
I'd love to post pictures of the blower drive pulley that I have pictures of with measurements but I have no idea how to do it on this forum with my cell phone :-(
Thanks for all the help guys
Dave

I really don't know what the 177 pulley looks like.

See if you can find someone to help you post a pic. Try and include the pilot on the back of the pulley.

It would be lower crank pulley for a 525SC. It is one pulley with 3 slots for V belts and a 10 rib on the outer side.

This is what i found up in the attic

It sure does Marc, does the blower pulley separate from the v belt pulley? Also is it a 10 rib blower pulley?
Thanks for all your help :-)

This is 1 piece. It's 6" OD, yes 10 rib :)
Can you use it?

Ran into the same problem years ago. Had stock 454 steel pullies machined to fit correct and accept blower pulley

That should be exactly what he needs.

We'll probably I can, it looks correct? How much $$$ . I'm also looking for a flame arrester for 850 holley that breathes! This motor had stock arrester on it if you have anything kickin around.
Thanks again Marc and everybody that helped
Dave

How does $100 including the ride sound?
Sorry, no flame arresters left :(

the ones I've seen and used all were 2 piece with a GM pulley for the V belts, now if used for a while they can be stuck together tight as hell..

Hey Marc, I'm sorry I never got back to you on the crank pulley, family member in hospital put the boat on back burner, I still really need that pulley if you still have it? [email protected] is my email also
Thanks again
Dave

Sorry about the family member, that always comes first.

I'll send you an email, yes we still have it.

still have the lower weiand pulley floating around? i am in need of one and ran across this post.

I have a brand NEW Mercury 525SC lower crank Pulley.
Ron Sporl
504-616-6005

I have a BRAND NEW Mercury 525 SC crank pulley.
Ron Sporl
504-616-6005