Offshoreonly.com - trs to speedmaster

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - trs to speedmaster (https://www.offshoreonly.com/forums/general-q/314542-trs-speedmaster.html)

bigboat28

06-30-2014 08:14 PM

trs to speedmaster

What needs to be done to go from trs to a speedmaster III. Will the transom have to be recut or is cut out the same? Will the transom have to be filled? How much does it usually cost to fill a transom drive cut out and recut it? Thanks

MILD THUNDER

06-30-2014 08:24 PM

Cut transom, swap TRS tailstock for a SSM tailstock on trans, move engines back a few inches.....

bigboat28

06-30-2014 08:28 PM

Will the transom hole from the trs need filled first or just need some more cutting?

MILD THUNDER

06-30-2014 08:49 PM

Quote:

Originally Posted by bigboat28 (Post 4146172)

Will the transom hole from the trs need filled first or just need some more cutting?

The SSM cutout is bigger I am pretty sure. You would want to plug the old mounting holes from the TRS though. My boat was a TRS boat originally, now has SSM drives, but that was done prior to me owning it. Couple buddies older cigs were converted too back in the day.

Unlimited jd

07-01-2014 05:39 AM

Different shape cut out. Better off filling and recut. You can use a new transom gasket as a template

All times are GMT -5. The time now is 12:48 PM.