Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Looking for an engine builder in South Florida...Who do you know? (https://www.offshoreonly.com/forums/general-q/314925-looking-engine-builder-south-florida-who-do-you-know.html)

Z-Ya Later 07-09-2014 12:23 AM

Looking for an engine builder in South Florida...Who do you know?
 
Hi Guys,

Great board, lots of info here. I haven't been on in a while but I need some help from the guru's.

I blew my motor Sat night. It was nothing fancy, 400 HP Mark IV BBC in a fishing boat.

I picked up a low hour (250) Gen 5 short block today. Short block looks good but will need a cleaning and checkout. I'm looking for a builder to assemble with my old Vortec heads (Bought on this board in 2004!! Thanks David R)

Laz Mesa built my last motor and did great work but I don't want to wait 3 months for this one.

So block checked out and cleaned. Bored if needed. Recon Rods, install new pistons, bearings ect. Assemble shortblock.
Heads checked out and valve job. Top end all roller. Assemble long block. Paint it to look pretty :-)

Who have you used and would recommend. I'm in Pompano Beach.

PARASAIL941 07-09-2014 12:55 AM

Bill's Marine can usually take care of that type of project pretty quick.754-234-5506. Good Luck!!!

Z-Ya Later 07-09-2014 10:18 AM

Morning Bump.....Wow, I haven't done one of those in years :-)

Orthobam 07-09-2014 11:18 AM

Native Racing Engines.

Z-Ya Later 07-09-2014 11:32 AM

@ Orthobam. I found a listing for them but the phone number is no good. Do you have a good number?

Native Engines

2408 Sw 57th Ter, West Park, FL 33023

(954) 986-9244

jeff32 07-09-2014 11:37 AM

chief? they are in florida if I recall right!

Z-Ya Later 07-09-2014 11:40 AM

Chief is in Fort Lauderdale. They do great work but are pricey. $3500 for assembly and dyno testing. For this motor I don't need all that.

PARASAIL941 07-09-2014 12:00 PM

I'll get in touch with Tony at Native for you (IMO the best h/p eng builder in the business). Figured Bills Marine was closer to a fishing boat budget.

Z-Ya Later 07-09-2014 12:12 PM

Bill put me in touch with Tony at Accurate Machine, i guess they work together. Tony said 2k for machining and long block assembly. That's a fair price but I always like to check a couple of shops before I pull the trigger.

Native sounds like a Chief engines. Great work but pricey. If I was building a 1500 horse blower motor I would go that route but as Para said i'm on a fishing boat budget :-)

I'm gonna pull the pan on the new short block tonight and check the rods and mains. I'm confident they are good but I just wanna put my eyes on them.

Thanks for the referrals, Keep them coming!!!

Orthobam 07-09-2014 12:38 PM


Originally Posted by Z-Ya Later (Post 4150409)
@ Orthobam. I found a listing for them but the phone number is no good. Do you have a good number?

Native Engines

2408 Sw 57th Ter, West Park, FL 33023

(954) 986-9244

That is the fax number

mobile
(561)-719-7685


All times are GMT -5. The time now is 03:11 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.