Offshoreonly.com - 1996 HP 500 Carb lifter part numbers

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - 1996 HP 500 Carb lifter part numbers (https://www.offshoreonly.com/forums/general-q/317522-1996-hp-500-carb-lifter-part-numbers.html)

farmo83

09-02-2014 11:01 AM

1996 HP 500 Carb lifter part numbers

I need to replace the lifters in my 96 HP 500. Does anybody have the part numbers? The Gen 6 have rollers but the Gen 5 have flat tappet, is this correct? I'm going to go ahead and swap out the valve springs again as well, any other info for on what all I'll need for these parts for this job parts wise would be very thankful!

Thanks

P.S. Is there an easy way to tell between a Gen 5 and 6 ?

Griff

09-02-2014 12:40 PM

All HP500's had roller cams and lifters.

All times are GMT -5. The time now is 12:43 PM.