Offshoreonly.com - Fuel supply issues

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Fuel supply issues (https://www.offshoreonly.com/forums/general-q/317607-fuel-supply-issues.html)

ezstriper

09-11-2014 01:41 PM

different intakes will signal carb differently so you really must jet to your setup, are you not running the carbs that were run on the dyno ?

JRider

09-11-2014 02:27 PM

Quote:

Originally Posted by nitrouspaul (Post 4186530)

check you metering block gaskets if its been apart and look for dirt in the bottom of the emulsion tubes too.

I did find some debris in one emulsion tube and a broke off drill bit in one...and a another broke off drill in the other block. It looks like it was poorly modified for more orifices in the emulsion tubes.

All times are GMT -5. The time now is 05:46 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page