Go Back  Offshoreonly.com > Technical > General Q & A
Need engine advice N A 598 cubic inch rebuild >

Need engine advice N A 598 cubic inch rebuild

Notices

Need engine advice N A 598 cubic inch rebuild

Thread Tools
 
Old 01-02-2015 | 09:51 PM
  #141  
14 apache's Avatar
Platinum Member
20 Year Member
Platinum Member
 
Joined: Apr 2005
Posts: 2,150
Likes: 15
From: Northport N.Y.
Default

Picture of that head gasket?
14 apache is offline  
Reply
Old 01-02-2015 | 09:54 PM
  #142  
Thread Starter
Registered
 
Joined: Sep 2011
Posts: 389
Likes: 0
From: Moscow OH.
Default

Originally Posted by Black Baja
If you get a chance post a pic of the piston that was next to bad cylinder.
Not sure they labeled them. There in a box I have not really looked at them. The builder even returned the bearings.
the mayor is offline  
Reply
Old 01-02-2015 | 10:14 PM
  #143  
14 apache's Avatar
Platinum Member
20 Year Member
Platinum Member
 
Joined: Apr 2005
Posts: 2,150
Likes: 15
From: Northport N.Y.
Default

Think this engine has more than one blow up by looking at other pistons. Glad your back up and running though.
14 apache is offline  
Reply
Old 01-03-2015 | 07:02 AM
  #144  
Thread Starter
Registered
 
Joined: Sep 2011
Posts: 389
Likes: 0
From: Moscow OH.
Default

Originally Posted by 14 apache
Think this engine has more than one blow up by looking at other pistons. Glad your back up and running though.
Not sure how you came to that conclusion. I have ran the boat for three seasons which is mid May to early October here depending on weather. With out any problems. I would do a leak down test and compression test at the end of every season always had similar numbers as when I bought it.
It's new now hope it last at least 3 seasons or more.
the mayor is offline  
Reply
Old 01-04-2015 | 10:26 AM
  #145  
ROB FREEMAN's Avatar
Registered
 
Joined: Sep 2006
Posts: 2,123
Likes: 2
From: Wis
Default

me three my friend .. its a boat they just break .. often . best of luck
ROB FREEMAN is offline  
Reply
Old 05-25-2015 | 05:09 PM
  #146  
Thread Starter
Registered
 
Joined: Sep 2011
Posts: 389
Likes: 0
From: Moscow OH.
Default

Finally took it out for test run today. Runs great didn't really push it. I think a high torque starter may be required now.

Last edited by the mayor; 05-25-2015 at 05:21 PM.
the mayor is offline  
Reply
Old 05-25-2015 | 05:31 PM
  #147  
Thread Starter
Registered
 
Joined: Sep 2011
Posts: 389
Likes: 0
From: Moscow OH.
Default

Video link initial start on a hose.


.

Last edited by the mayor; 05-25-2015 at 05:40 PM.
the mayor is offline  
Reply
Old 05-25-2015 | 06:07 PM
  #148  
GPM
Registered
20 Year Member
 
Joined: Mar 2004
Posts: 2,697
Likes: 93
From: Pa
Default

Very Nice !!!
GPM is offline  
Reply
Old 05-25-2015 | 07:10 PM
  #149  
ROB FREEMAN's Avatar
Registered
 
Joined: Sep 2006
Posts: 2,123
Likes: 2
From: Wis
Default

sounded great .. very crisp . best of luck
ROB FREEMAN is offline  
Reply
Old 09-29-2016 | 09:26 PM
  #150  
ROB FREEMAN's Avatar
Registered
 
Joined: Sep 2006
Posts: 2,123
Likes: 2
From: Wis
Default

hows she running my fiend
ROB FREEMAN is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.