Hey guys , I will no doubt have to run my blower out of the hatch and do not want water mist getting sucked into the rear carb . Will a scoop like this play hell with airflow to that rear carb . Has anyone done any dyno testing with one ? Thinking about two HP500 type flame arresters in lieu of the K$N filters . I want to give the blower every advantage . http://www.rbssuperchargers.com/Prod...-0048&pID=6345

I think youd be on the right track by ditching the KN style filters inin them. Not sure the hp500 areestors would fit. They make some small like 3x5 arrestors that are pretty unrestrictive and cheap. My buddy has them, cant remember who makes them but ill find out

Where did my blower friends went ? :boat:

Hey Bud. Not sure if this would work inside that scoop, but its what I was thinking of earlier.

http://shopping.rexmar.com/Merchant2...lamearrbarbron

Its fall All the blowers are busy with leaves.

True dat !

My Husqvarna back pack blower uses a centrigual blower though.

I used my mulching attachment on my blower yesterday. Nice deal, its like walking around with a giant shop vac that chops shiit up

You get water mist back there ?

Ok thanks MT . Any thoughts regarding that scoop vs airflow to the rear carb ?

Yes and lots of it at wfo . My bud has a 25' Daytona , used an oval filter and was taking water in the rear carb . My cat mists up the same , high on the stern