Offshoreonly.com - How is compression ratio figured?

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - How is compression ratio figured? (https://www.offshoreonly.com/forums/general-q/320008-how-compression-ratio-figured.html)

Black Baja

11-10-2014 03:33 PM

Quote:

Originally Posted by Cole2534 (Post 4217139)

You sure BB? I got them F gearsets in my Bravo II.

I'm usually pretty good at propping boats. If the 17p 3 blade doesn't work may wann try a 2 blade plastic trolling motor prop if you can find 1 to fit a bravo.

Black Baja

11-10-2014 04:16 PM

Quote:

Originally Posted by MILD THUNDER (Post 4217158)

How do you feel about running the fuel pump from a 1976 Ford Pinto on that setup?

Definately an improvement over Budman's electric pump. With that combination I would think the pinto pump would work. I do have an old marine pump off a 1967 2.5 iron duke if that would help the guy out. It was a 110hp 2.5 so I would think with that combination the pump I have would be very close.

Cole2534

11-10-2014 04:25 PM

As an aside- who makes a good compression tester? I don't feel paying snap-on/matco prices.

All times are GMT -5. The time now is 01:32 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page