Fuel Pump and Filter mounting
Just purchaced a new Aeromotive 11108 fuel pump. Does anyone make a mounting bracket for this pump to the engine block? Currently, my water separator, fuel pump and Filter are all mounted on the back seat wall in front of the motor. I would like to move this whole setup to the motor if possible.
|
Electric pumps need to be mounted low. They are made to push fuel and do not pull well.
|
On the Merc 700sci they have a bracket that mounts the pump below the oil pan in front of the block.. (I think, judging from pictures). I also believe the AEO-11108 is the same pump as the merc one. perhaps that bracket will work. gets the pump nice and low. I was hoping someone had made a bracket though.. getting a hold of merc stuff is a challenge.
|
You could use a bracket like this, from a 525 efi. It's less than $60
http://www.mercruiserparts.com/Show_...nd+Fuel+Cooler It puts the pump under the balancer. You would have to drill some mounting holes in it, but that isn't a big deal. Eddie |
All times are GMT -5. The time now is 03:50 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.