Rubberized spray flooring?
 

Last winter I was hot on the idea of putting Sea Deck in the cockpit of my ride. After a call out the company I changed my mind. So now I'm kicking around the idea of a spray in ruberized flooring.... Something that will hold up. It needs to be white and not get slick when wet. My current floring is just to slick when it's wet.

Mike have you considered going with a lonseal/pirelli type rubber floor?

Ayuh,.... Try Grizzly-grip, or Durabark, a bedliner type stuff, that's Rolled on, not sprayed,...

Comes in lots of colors,...

I have Joe, my concerns are the edges of the gunnels. My interior panels do not go ls the way to the floor. Also the idea if taping it off and applying it seems much easier... And I'm thinking it will give it a cleaner look. Have any idea how slick that stuff gets when it's wet?

Is it hard to clean?

I used durabark on the engine hatch on my Gibson, way rough and hard to clean...

I had Pirelli flooring in the A.T. and it was impossible to keep clean.
I love carpet personally.

I spent the day in a F4 this past summer and thought it had the best carpet I had seen. It was a snap out, rubber loom type. It was cool, dried quickly, and provided amazing cushion when standing. Not sure who it's made by but I want it for myself

http://marineflooring.net

This?

^^^ that has to be the Frisini 30 aka Adrenilne model above in that link..

Ya I think it is.... I'm prob going to call on that stuff and see what the coast is.

He cuts a fish up on it!!!

http://youtu.be/DuNhm0wE4Kk

That is pretty cool!!

I'll get a group price .... A 28zx and 38 cig.

Cause I don`t have enough $hit to buy.
You should make a floor out of soap, it would always be clean and your feet would smell wonderous!

I think when you get the floor done on your boat, you should leave all the seats out. then we can take it out and wear roller blades at the same time!!

You have the best ideas cause that would be HILARIOUS!
 

The floor is done so come over, bring some blades and we`ll practice.

We re-sprayed the floor of the Scarab with gel coat with an abrasive adder (sand?). We had removed all the existing floor mounted seating and had too many patches and textures. It came out great, someone like GlassDave could do this. All we do is vacuum and wipe with a wet towel or annually wash the floor with a scrub brush.