Offshoreonly.com - Oil Pan Swap / Value

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Oil Pan Swap / Value (https://www.offshoreonly.com/forums/general-q/321761-oil-pan-swap-value.html)

sbslinde

01-06-2015 08:31 AM

Oil Pan Swap / Value

Is there much value in swapping a 6qt stock steel pan for an aluminum 7 qt pan. Both are merc pans. Gen 4 454 mag being rebuilt this winter with a roller cam and rockers.

Thanks

Jonesyfxr

01-06-2015 08:33 AM

IMO a little extra oil never hurt anything.

Full Force

01-06-2015 10:52 AM

if you swap go bigger, like 10QT, more oil means less wear on it... cooler temps...the extra 1qt is not really worth the additional cost, unless you get pan free....

Black Baja

01-06-2015 12:37 PM

The aluminum pan will dissipate heat a lot faster than the steel pan. This can be good or bad if you have a sealed bilge the motor will invest the dissipated heat. If you have a scoop or vents the heat has somewhere to go besides the motor. Depends on the application if it will benefit or not.

mike tkach

01-06-2015 04:34 PM

Quote:

Originally Posted by Full Force (Post 4244985)

if you swap go bigger, like 10QT, more oil means less wear on it... cooler temps...the extra 1qt is not really worth the additional cost, unless you get pan free....

more oil won,t make it cooler,it will just take a little longer to reach it,s operating temp.

Full Force

01-06-2015 09:50 PM

Quote:

Originally Posted by mike tkach (Post 4245174)

more oil won,t make it cooler,it will just take a little longer to reach it,s operating temp.

But with more capacity I would have thought the oil would not cycle as fast, oh well... sounded good!!

All times are GMT -5. The time now is 04:15 AM.