Fuel Pressure Boost Combo Gauges
02-16-2015, 10:46 AM
#1
Registered
Thread Starter
Join Date: Jul 2009
Location: Utah
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Fuel Pressure Boost Combo Gauges
Looking to replace the two factory trim gauges for a Fuel Pressure / Boost Pressure combo.
Any suggestions?
This is what I have found so far.
http://scienceofspeed.com/products/i...n/dual_gauges/
Any suggestions?
This is what I have found so far.
http://scienceofspeed.com/products/i...n/dual_gauges/
03-02-2015, 10:44 AM
#3
Registered
Thread Starter
Join Date: Jul 2009
Location: Utah
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
What about an interactive display? Is there something that will plug in the diag port for of the MEFI 3?
I contacted these folks and they said they can't help.
http://www.aeroforcetech.com/index.html
I contacted these folks and they said they can't help.
http://www.aeroforcetech.com/index.html
03-02-2015, 10:57 AM
#4
Registered
iTrader: (4)
When I finally get around to installing EFI systems. I plan on purchasing a tablet for each engine and installing an app such as Torque to monitor my engine systems. Search Torque OBDII on YouTube.
It will probably be less expensive than all new guages when done.
https://www.youtube.com/watch?v=bzaygqwqTWA
https://www.youtube.com/watch?v=Nv13Nc4FXQY
It will probably be less expensive than all new guages when done.
https://www.youtube.com/watch?v=bzaygqwqTWA
https://www.youtube.com/watch?v=Nv13Nc4FXQY
Last edited by Rookie; 03-02-2015 at 11:23 AM.
