Go Back  Offshoreonly.com > Technical > General Q & A
33 outlaw throttle/shifter/indicator cables >

33 outlaw throttle/shifter/indicator cables

Notices

33 outlaw throttle/shifter/indicator cables

Thread Tools
 
Old 03-28-2015, 01:41 PM
  #1  
Registered
Thread Starter
 
Join Date: Dec 2014
Location: NYC
Posts: 81
Likes: 0
Received 0 Likes on 0 Posts
Default 33 outlaw throttle/shifter/indicator cables

I want to replace all the cables on my boat and was wondering if anyone with a 33 outlaw has changed theirs and knows the sizes to all 8 cables. I know the codes are on them but I'm trying to order online without going over to the marina and uncovering and climbing in. It's a mission since I removed the swim platform and ladder.
ivanfuego is offline  
Old 03-28-2015, 08:26 PM
  #2  
Registered
 
Join Date: Jan 2004
Location: Tennessee
Posts: 4,480
Likes: 0
Received 40 Likes on 16 Posts
Default

It would be in your best interest to just get the numbers from the original cables. You may find that you want to route them a little different, requiring a little longer or shorter cable. They may also have several feet of slack stuffed in the gunnel behind the upholstery that you can do away with by using the correct length cables. Just relaying some of the things that I've run into over the years.
Eddie
Young Performance is offline  
Old 03-30-2015, 09:07 AM
  #3  
Registered
 
Join Date: May 2006
Location: Huntsville, AL
Posts: 1,628
Likes: 0
Received 0 Likes on 0 Posts
Default

I would be interested in this as well. Just in case I ever need to replace one.
mittens is offline  
Old 03-30-2015, 09:17 AM
  #4  
Platinum Member
Platinum Member
iTrader: (6)
 
F-2 Speedy's Avatar
 
Join Date: May 2012
Location: Midwest & T-Rock
Posts: 10,418
Received 3,047 Likes on 1,357 Posts
Default

I did all my indicators, pretty sure they were

21' starbourd tab
24' starboard drive
26' port drive
28' port tab
F-2 Speedy is offline  
Old 04-03-2015, 06:42 PM
  #5  
Registered
Thread Starter
 
Join Date: Dec 2014
Location: NYC
Posts: 81
Likes: 0
Received 0 Likes on 0 Posts
Default

So I pulled my cables and here's the lengths. Maybe the next guy wanting to change his sees this.

Shifters: port 24'/starboard 21'
Throttles: port 23'/starboard 20'
Drives: port 26'/starboard 26'
Tabs: port 27'/starboard 21'

Don't know why the shifters are a foot longer than the throttles on both sides but they're all going longer so I can route them with the tabs I like the way those 2 arrived at the helm. Also gaffrig doesn't do odd numbers so I need all evens.
ivanfuego is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.