Offshoreonly.com - 1987 wellcraft 26 spyder

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - 1987 wellcraft 26 spyder (https://www.offshoreonly.com/forums/general-q/325369-1987-wellcraft-26-spyder.html)

Fxdl rider

04-20-2015 08:40 PM

1987 wellcraft 26 spyder

Starting restoration on this boat has anyone ever removed the engine compartment liner ? I want to make sure there is no unseen damage or rot .

phragle

04-20-2015 10:44 PM

you need to trim back the floor on the sides, then remove the screws at the front and back. There should be round access ports in the front and back of the middle hump, loop a rope around that and hoist away. if it sticks you may need to take something thin like a putty knife and a hammer to bust the gorrila snot at the front/back.

Fxdl rider

04-21-2015 12:11 AM

Thanks , so I am guessing I would cut about 6 inches from the hull sides in towards the middle ?

phragle

04-21-2015 01:02 AM

Does this help??

http://img.photobucket.com/albums/v6...e/eeb1e516.jpg

http://img.photobucket.com/albums/v6...e/ee8123a3.jpg

Fxdl rider

04-21-2015 01:18 AM

Thanks for the pics ...

All times are GMT -5. The time now is 06:25 PM.