Offshoreonly.com - intake manifold torque lbs

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - intake manifold torque lbs (https://www.offshoreonly.com/forums/general-q/325371-intake-manifold-torque-lbs.html)

bigboat28

04-20-2015 08:53 PM

intake manifold torque lbs

How many lbs do you torque the intake manifold bolts to on a hp500 and what is the correct order to torque bolts?

mike tkach

04-20-2015 09:01 PM

start in the center and work your way out,german torque.

sutphen 30

04-20-2015 09:09 PM

30ft/lbs

bigboat28

04-20-2015 09:09 PM

#'s?

bigboat28

04-20-2015 09:10 PM

Thanks

mike tkach

04-20-2015 09:24 PM

goodentite.

Full Force

04-21-2015 05:21 AM

Quote:

Originally Posted by mike tkach (Post 4294676)

start in the center and work your way out,german torque.

Hand TQ wrench? lol

SB	04-21-2015 05:31 AM

Quote:

Originally Posted by Full Force (Post 4294749)

Hand TQ wrench? lol

Much better than Canadian torque. Tighten till it breaks and then back off a touch.

x 2 to 30ftlbs. After a little run time, go back and re-torque.

sutphen 30

04-21-2015 06:05 AM

I find that at 30ft/lbs the bolts stay tight but it never hurts to check them,even a few times later.

All times are GMT -5. The time now is 04:47 AM.