Anyone add hydraulic bleeder tees?
30 spectre with marine machine hydraulic steering, aeroquip 401-6B fittings on hoses; Had to change one out, thought I had it bled pretty good but steering is sloppy. Wondering if anyone has added bleeder tees to a system like this. I haven't seen any tees with 45 deg SAE (5/8-18) threads. I think someone mentioned that the marine machine cylinders have 1/4 NPT fittings---could probably find a bleeder T to fit that. Wondering if anyone has blazed this trail, could point me in the right direction to find the part. thx
|
Never had an issue bleeding the steering to warrant a bleeder.
|
As long as you follow this procedure you should not need any other way to bleed.
http://www.everettperformance.com/PD...ING_SYSTEM.pdf |
Originally Posted by CIG3
(Post 4333687)
As long as you follow this procedure you should not need any other way to bleed.
http://www.everettperformance.com/PD...ING_SYSTEM.pdf |
Thanks I'll give it a shot.
|
All times are GMT -5. The time now is 12:04 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.