Did you just change impeller but not the black plastic housing and wear plate along with the correct new o-ring gaskets ?
If you did change all of that - did you crack the impeller housing when cranking the bolts down ? It only requires 10 ft lbs of torque in a star pattern when installing |
The SB says saltwater only but that is not true. Seen many from lake waters as well.
http://www.boatfix.com/merc/bullet/90/90_14.PDF |
Originally Posted by BUP
(Post 4336526)
Did you just change impeller but not the black plastic housing and wear plate along with the correct new o-ring gaskets ?
If you did change all of that - did you crack the impeller housing when cranking the bolts down ? It only requires 10 ft lbs of torque in a star pattern when installing |
All times are GMT -5. The time now is 01:55 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.